Contact me directly for custom orders @ JohnsonArms76@gmail.com
Damn bro! Lots of awesome work. You’ve definitely been busy. I think Nerf and/ or the others should be taking notice and looking to bring you in for some creative development. All the best. You deserve every bit of it!
March 10, 2011 at 2:13 am
Thanks bruddah! Ya, idle hands, you know? 🙂 Lots of good stuff has been happening lately, so I’m pretty happy to be doing my thing with the guns 🙂 Gotta get you guys up to see all the stuff in person!
March 10, 2011 at 2:24 am
Is most of your stuff pretty much custom order other than the etsy and ebay accounts
November 14, 2012 at 12:18 pm
Could you do digital camo?
May 23, 2011 at 3:51 am
I’ve done digital a few times, but it’s so time-intensive, I have to reserve that for people who really want it. It does look really cool when done properly 🙂
May 24, 2011 at 4:39 am
I have followed your work from the RPF and it is all amazing.. I LOVE the Mass Effect colour scheme, but I am looking for something to modify into a steampunk tri-barrel or quad barrel elephant gun / gatling, so I have a favour to ask… Could you post a pic of the Swarmfire without the shroud on it?
July 12, 2011 at 3:53 pm
I’ll email you any photos I have without the shroud, Dave. Thanks for all your support, I really appreciate it!
July 12, 2011 at 7:23 pm
Awesome paint and mod work you got. I myself am learning how to do my own mods with my steampunk group, Ironclad Cairo, out of New Orleans. Give us a shout if your coming to town.
October 25, 2011 at 1:33 am
Thanks and I promise, buddy! Always good to have friends in N.O. 🙂 Do the same if you did yourself in my neck of the woods!
October 26, 2011 at 5:37 pm
Hey radical guns man, amazing work I do a little modding myself but I do not do this crazy crud. any who a few questions, how do you do the mods, why so expensive, and do you take out the air restrictors?
November 19, 2011 at 9:38 am
I make props for films and the Nerf is something I do as well, but for fun. I spend about 2-3 weeks on the guns and that’s the reason for the prices that may seem high, but are about half of what I would normally get for that amount of work if it was on an actual prop. Thanks for checking out my stuff and I hope you’ll continue to enjoy the new ones.
I don’t do internal mods generally, mainly because if the gun fails its a really bad thing and most of the guns are just for display and not for actually using on a regular basis 🙂
November 19, 2011 at 2:33 pm
Hey Nick! The cost is due to the time involved in prepping the gun and then the actual painting. The work involved is about 8 hours on the larger guns and actually the price should be higher, but I do the NERF guns on the side and I just have a lot of fun making and painting them. If you ever give it a try, I’d like to see the results!
December 3, 2011 at 1:26 pm
I’m in the process of trying to build a Mal costume and stumbled across your work on the RPF. Simply Amazing. I actually ended up on your website, and man, talk about cool work! I’m not really even into steampunk and that stuff is just spectacular. Nerf never looked so good. 🙂
I had a question for you about the Mal guns. Is there any possibility you could sell me just one of the kits (if you have a supply)? Or at least, to make it worth your while, do a simple paint job on it, nothing that would cause you much headache? I think you said something about it being 225 shipped on the RPF, but I just don’t know that I can afford that right now. Again, I just appreciate your time (and I know that you are painting these out of a love, not making too much profit, if any) so let me know what you think. I can’t tell you how much I love the paint jobs your giving the Mal guns in particular. Seriously, you are talented!
Thank you sir!
February 9, 2012 at 4:39 am
Thank you and good talking to you about this. I hope I can help ya at some point!
February 17, 2012 at 6:42 am
I am very very interested in your NERF mods.
Could please let me know which of them are currently available? Their cost? The cost for shipping them to Italy?
February 15, 2012 at 1:49 pm
Email sent, Aldo. Thank you!
February 17, 2012 at 6:27 am
Such a great job! Keep up the great work, man.
February 28, 2012 at 7:57 am
Thank you, David! Always appreciated 🙂
February 28, 2012 at 8:10 am
Hey I saw you at the Orlando Mini Maker Faire and on your table you had a airsoft M16, or at least I think it was an M16 but can you e-mail me the prices, colors, options, and if its not to much to ask some pictures.
May 26, 2012 at 10:22 pm
your work is amazing. could u leave a direct link to where i can buy ur stuff
August 21, 2012 at 8:41 am
Hi Joel! I like to make it hard to order, haha. Ok, not really, but I’m not set up to handle that volume of orders. You can always reach me directly at email@example.com 🙂
August 25, 2012 at 7:30 pm
could you pls put some cheaper mavericks on that are under £20. doesnt have to be your best but if that is posible i would be veryy happy
August 22, 2012 at 11:04 am
I wish I could, but nothing I make could be anywhere in that price range, unfortunately. I do the NERF for fun, but they still take a ton of time just to prep and make ready for painting. That alone would make the price beyond the €20 you mentioned. I’m still really honored that you’d want to own something I made, regardless.
September 4, 2012 at 1:30 pm
Hello there I am simply amazed by the level of work that you put into your creations! I had a question for you though. Exactly how far could you take a modification? For example could you make a functioning nerf gun resemble a bolter from Warhammer 40,000?
September 18, 2012 at 5:04 am
Also what paints do you use if you don’t mind me asking?
September 18, 2012 at 5:12 am
Mainly Testors paints (enamels) and some of the other quality model paints. Mostly stuff you can find at a hobby shop. I hope that helps!
October 9, 2012 at 3:21 am
Johnson Arms… If you could possibly make a Halo Assault Rifle Replica for me… I would love to buy it. Dunno if you could contact me, but I would absolutely love that.
October 12, 2012 at 12:33 pm
I love looking at your unique paint jobs they are spectacular and show extreme skill. Keep up the good work. I was wondering how you do your pricing is it based on the amount of paint or the amount of time and email me i was interested in you painting one of my guns.
October 13, 2012 at 4:56 am
I really appreciate your comments, it really does help to see them through another set of eyes. Pricing is a really tough thing to put into a formula other than just a general hourly rate and a (hopefully) an accurate estimation of time to complete. I try to be fair and not charge my “business” rate. I do have to charge for my free time, haha. What I generally hold to is pistols are about 250 and rifles start at about 500 for the fancy stuff 🙂 I promise I put all the effort I have into each of ’em, regardless of what they started as 🙂
Any time you need a quote, I’ll be right over here <— hehe Take care and talk to you soon!
October 13, 2012 at 5:43 am
You need to add more to your web store there are many i would consider buying i just dont know the prices , how much for the longshot in the vero 2.0 edition section
November 4, 2012 at 3:14 pm
I appreciate your opinion, Andrew! I don’t like to know that someone is having trouble commissioning a prop 🙂 The best way to get a price quote is to email me directly with a link or image to what you’re wanting. I can get back to you directly with prices and also answer any other questions before you settle on something specific. My email is firstname.lastname@example.org if you’re still interested, thanks!
November 4, 2012 at 6:39 pm
hey could you make a custom MA5 or BR55 from halo. I would freeken love that
November 22, 2012 at 4:58 pm
They’re rather expensive, but I may have another commission for one soon. If so, it may also have the lighting and ammo counter installed. That would look nearly perfect! Stay tuned!
November 23, 2012 at 12:20 am
Fill in your details below or click an icon to log in:
You are commenting using your WordPress.com account.
( Log Out /
You are commenting using your Google account.
( Log Out /
You are commenting using your Twitter account.
( Log Out /
You are commenting using your Facebook account.
( Log Out /
Connecting to %s
Notify me of new comments via email.
Notify me of new posts via email.
Create a free website or blog at WordPress.com.